| Version | Logs |
| Smart Cloud v.16.15 | - Security module old page 'bypass' change into 'bypass watch dog'.Watch dog configuration function added. - Security module page 'Vacation Settings' fixed bugs which 'Enable' unchecked not work. - Security module page 'General - History Log' add history type 'Watch Dog'. - 5-IPIR module added. - Microwave add Multi-Target-Config page. |
| Smart Cloud v.16.07 | - Modify some bugs in security module - Add 5IN1T/5IN1S/6IN1T/6IN1S/8IN1 module - Modify some bugs in 9IN1 module |
| Smart Cloud v.16.06 | - Add 5in1 Configuration; - Solve the Dimmer Bug which can't open data base; - Solve the Bug which can't read the security remark - Fix the display not Clean problem |
| Smart Cloud v.16.05 | - Add new function for 9in1:Temperature condition,Temperature compensate,Translational speed for PIR and so on. - Modify a bug in the Security module's "Bypass" page. - Modify some bugs which can not read the PIR's status and can not read the count down correct. - Modify IR Macro bug |
| Smart Cloud v.16.01 | - Update the icons of the main menu - It can scan the devices of hotel,but can not configure - Repair the bugs of the last version - User can entry the device configure page from the main menu |
| Smart Cloud v.16.00 | - Modify some bugs of the "Subnet Filtered List" form. - Add a configure interface for the LED Driver device. - Add a configure interface for the Fan Speed device. - Cancel the license. |
| Smart Cloud v.15.50 | - Modified MultiSensor series equipments' illumination compensation range from 1-100 to 1-200. - Added the new function of 6in1TS, 5in1TS 6in1TL, 5in1TL. - Added the new function of S-Wave control. - Added the new interface of LED driver control. In clude the circuit, scene, sequence and light control. Debug: - Corrected the MultiSensor can not read the temperature sensing besides the first channel of 4T. - Corrected the reception set range of infrared (1-20). - Corrected the display of MultiSensor pages to switch. |
| Smart Cloud v.15.40 | - Added the Serial License Registration. |
| Smart Cloud v.15.33 | - Updated security, IR receiver page for 319,320 devices, Solved the Remark can not be saved. - Solved logic commands for 319,320 devices can not be saved - Function increases or adjustments: * Updated the illumination compensation refresh. * Updated temperature touched C, F adjust automatically refresh * Temperature compensation value from -16 to +16 * Increased 0x0031 command for 319 testing functionality page * Increased SmartCloud RadioGroup control display settings support * The original 5020 equipment from SmartHotel special equipment re-developed into a regular Zone Beast equipment. * Updated 319 (8in1) and 320 (New 9in1) temperature of the device protocol, and the increase in the settings page of the temperature sensor. |
| Smart Cloud v.15.28 | - Modify the dimmer module. In area tab, it does not have partition operation error. |
| Smart Cloud v.15.25 | - The impulse device is added - New function 9in1 pairing with DDP fixed - Dimmer and relay problem fixed |
| Smart Cloud v.15.00 | |
| Smart Cloud v.14.26 | |
| Smart Cloud v.14.24 | |
| Smart Cloud v.14.22 |
| Version | Logs |
| JTAG Firmware Upgrade |
| Version | Logs |
| 0-10V Ballast Oct 9 2010 |
| Version | Logs |
| 3B v.2.41 |
| Version | Logs |
| 4B v.2.41 |
| Version | Logs |
| 6B v.2.41 |
| Version | Logs |
| 4T v.1.40 |
| Version | Logs |
| 4Z Dry Input June 20 2012 |
| Version | Logs |
| 5in1 v.1.58 (L) | - Modified the instability of IR Launch. - Modified that the long code of IR launch can not be sent. - Optimize the logic part. - Optimize the operation speed of 9in1. - Increase the motion speed of the motion sensor.(SC V16.05) |
| 5in1 v.1.58 (S) | - Modified the instability of IR Launch. - Modified that the long code of IR launch can not be sent. - Optimize the logic part. - Optimize the operation speed of 9in1. - Increase the motion speed of the motion sensor.(SC V16.05) |
| 5in1 v.1.56 (L) | - Updated Mac reconfiguration after upgraded. |
| 5in1 v.1.56 (S) | - Updated Mac reconfiguration after upgraded. |
| 5in1 v.1.53 (L) | |
| 5in1 v.1.53 (S) | |
| 5in1 v.1.45 (L) | |
| 5in1 v.1.45 (S) |
| Version | Logs |
| 6in1 v.1.56 (L) | - Updated Mac reconfiguration after upgraded. |
| 6in1 v.1.56 (S) | - Updated Mac reconfiguration after upgraded. |
| 6in1 v.1.53 (L) | |
| 6in1 v.1.53 (S) | |
| 6in1 v.1.45 (L) | |
| 6in1 v.1.45 (S) |
| Version | Logs |
| 8in1 v.1.58 | - Modified the instability of IR Launch. - Modified that the long code of IR lanunch can not be sent. - Optimize the logic part. - Optimize the operation speed of 9in1. - Increase the motion speed of the motion senser.(SC V16.05) |
| Version | Logs |
| 9in1 v.1.58 | - Modified the instability of IR Launch. - Modified that the long code of IR lanunch can not be sent. - Optimize the logic part. - Optimize the operation speed of 9in1. - Increase the motion speed of the motion senser.(Smart Cloud V16.05) |
| 9in1 v.1.56 | - Updated Mac reconfiguration after upgraded. |
| 9in1 v.1.54 | - 9in1 pairing to DDP has been added. - add all key button function to remote controller. - Temperature logic. - LUX updating and temperature range modification （revised +_8 degree to +_16 degree. |
| 9in1 v.1.52 | - Modified the problem that it cannot save the value of compensating for temperature. |
| 9in1 v.1.45 |
| Version | Logs |
| DDP Library Jan 5 2012 | |
| DDP v.1.54 | - Listen configuration actions of the HVAC that binding with DDP - Add command to call DDP light page bottom functions |
| Version | Logs |
| Dimmer 2CH v.2.03 | |
| Dimmer 2CH v.2.01 |
| Version | Logs |
| Dimmer 4CH v.2.03 | |
| Dimmer 4CH v.2.01 |
| Version | Logs |
| Dimmer 6CH v.2.03 | |
| Dimmer 6CH v.2.01 |
| Version | Logs |
| Dimmer 8CH v.2.03 |
| Version | Logs |
| HVAC v.1.28 |
| Version | Logs |
| Hotel AUX v.1.14 | - add the address detect and address save. |
| Hotel AUX v.1.13 | - Fix the cut power delay bug |
| Hotel AUX v.1.11 |
| Version | Logs |
| Hotel Bedside v.1.08 | - Enable it receive universal switch commad for it can be control hotel service by other device(DDP++) - Rectify bug that climate cannot synch display wiht DDP,when use ddp to control same hvac. |
| Hotel Bedside v.1.00 |
| Version | Logs |
| Hotel Card v.1.16 | - add led flash when long press the DND,CLEAN and LAUNDRY button |
| Hotel Card v.1.13 |
| Version | Logs |
| Hotel Door Bell(With Card) V1.01 | - Rectify the BUG of display of the hotel service |
| Version | Logs |
| Hotel Door Bell(Without Card) V1.01 | - Rectify the BUG of display of the hotel service |
| Version | Logs |
| Zone Beast v.1.18 | - Solve issue (HVAC can't get temperature form specify 4T channel.) - Remove the bug that if hvac in fan mode and fan speed in auto maybe it incorrect working. |
| Zone Beast v.1.17 | - Remove the bug that second byte error return from channel reversing operation instructions |
| Zone Beast v.1.16 | - Remove the bug that occasionally the address to be loss |
| Version | Logs |
| IR Learner v.1.00 |
| Version | Logs |
| IR v.1.06 |
| Version | Logs |
| IR Macro v.1.06 | - Add functions for Macro control |
| Version | Logs |
| LED Driver V.0.06 | - When finish the sequence running, the led-driver need to return to the previously running mode. - When finish the scene and the RGBW running, the led-driver no need to return to the previously running mode. - Add the command for reading the current value of all the channels. |
| LED Driver V.0.05 |
| Version | Logs |
| Logic v.1.21 |
| Version | Logs |
| Microwave Sensor v.0.94 | - Modify the code so that the user can select: when the sensor senses some activity, whether its internal beeper beeps(The default is the buzzer is off, but when the sensor is forced open, the buzzer will sound) |
| Microwave Sensor v.0.93 |
| Version | Logs |
| PIR Sensor v.0.02 | - Solve unable to transmit multi-byte command |
| Version | Logs |
| Relay 2CH Nov 20 2012 |
| Version | Logs |
| Relay 3CH v.1.05 |
| Version | Logs |
| Relay 3CH v.1.05 |
| Version | Logs |
| Relay 4CH 16A v.2.21 | - Fixed the crash problem of the relay, when modify its flag of the manually pairing. |
| Relay 4CH 16A v.2.20 |
| Version | Logs |
| Relay 4CH 20A v.2.21 | - Fixed the crash problem of the relay, when modify its flag of the manually pairing. |
| Relay 4CH 20A v.2.20 |
| Version | Logs |
| Relay 6CH 16A v.2.21 | - Fixed the crash problem of the relay, when modify its flag of the manually pairing. |
| Relay 6CH 16A v.2.20 |
| Version | Logs |
| Relay 8CH 16A v.2.21 | - Fixed the crash problem of the relay, when modify its flag of the manually pairing. |
| Relay 8CH 16A v.2.20 |
| Version | Logs |
| Relay 12CH v.1.07 | - Fixed the crash problem of the relay, when modify its flag of the manually pairing. |
| Relay 12CH v.1.06 |
| Version | Logs |
| Security v.1.2 | - Add BUS Watch Dog in Security Module. - Modified the conflict of alarm commands storage and the memory of vacation. - Log for watchdog. |
| Security v.1.1 |
| Version | Logs |
| Zone Audio v.1.23 | - Modify the IP,before the IP read the list of songs sometimes appear Insanity. |
| Zone Audio v.1.22 | - Add the infrared remote control function |